Testing

DIT-MCO 2651
The Model 2651 offers benchtop interconnect verification testing in a compact, shock-resistant enclosure. It measures voltage, resistance, and capacitance while comparing these measured values to programmable limits. It also detects momentary dielectric breakdowns and conducts 4-wire Kelvin measurements.

773

DIT-MCO 2650 MTA
DIT-MCO Model 2650.MTA - Gains MIL-STD 810F certification. The 2650.MTA’s switching module supports up to 1500 test points per unit but can be configured to suit your needs in increments of 100 points so you won’t waste test electronics. Test interfaces on the standard unit are either 150 point ZIF or 50 pin D-sub connectors but can be customized to fit your needs. Special 500 point switching modules provide small size and weight for use in locations where only a few test points are required.

772

DIT-MCO 2508 High desity switching
The 2508 configurations include a single cabine with either internal or external switching. You can select from two 2508 internal switching configurations: a single bay cabinet for up to 8,000 test points or a double bay cabinet for up to 20,000 test points. Since instrumentation options may reduce the amount of space for switching, you can add a bay to support those options.

771

DIT-MCO 2505
The Model 2505 provides up to 5,000 test points in a compact, roll-around configuration. The standard configuration includes the Single Board Comparator but can include the optional Digital Capacitance System (DCS-III) for greater accuracy

770

DIT-MCO 2503
The standard control cabinet provides support for three (3) external switching cabinets or 30,000 test points. Add additional switching cabinets using optional I/O expansion panels for up to 100,000 test points. The switching cabinet’s size makes it easy to move between departments, test sites or form boards.

769

DIT-MCO 2500 MBA
As a 19-inch rack mounted assembly, the 2500.MBA expands at the module level in 1,000-point increments or at the board level with two buses of 100 points per board. You can even mix standard switching with random bus switching to minimize costs.

768

DIT-MCO 2500 HVA
The Model 2500.HVA provides high voltage stimulus up to 2000 VDC and 2000 VAC. This high voltage is reached using the Series 41 switching system.

767

DIT-MCO 2135
The perfect tester for field use is rugged, mobile, and lightweight, without sacrificing the functionality and power of a larger system. That tester is found in the Model 2135. Weighing less than 30 pounds, this wiring analyzer handles up to 300 test points of Series 19 switching per unit. Expansion units give you additional flexibility in field testing. The 2135 can be powered from any AC source 100-240 VAC so you can use it anywhere in the world.

766

DIT-MCO 2115 Benchtop
compact size tester for many benchtop or portable test applications. The 2115 delivers a full 1500 volt isolation and 2 amp continuity test stimulus. An optional AC breakdown test providing 1000 VAC test stimulus.

765

Schleuniger SPU 100
saw and polish unit for crimp connections and others with cross section ranges up to 100 mm².

702

NEW !!!!!!! DIT-MCO 2650 MTA
The 2650.MTA’s switching module supports up to 1500 test points per unit but can be configured to suit your needs in increments of 100 points so you won’t waste test electronics. Test interfaces on the standard unit are either 150 point ZIF or 50 pin D-sub connectors but can be customized to fit your needs. Special 500 point switching modules provide small size and weight for use in locations where only a few test points are required.

614

SLE SBL Micro02
Complete test-case for cross-section analyzing of different crimpconnections from 0.22 to 6.0 mm².

345

SLE testtable SBL 3000
Testtable made for different applications.

321

Cirris AST
Complete function testsystem.

320

Cirris Easy Wire
Test Points: 256 - 32,000 Test Current: 6.5 mA max Test Voltage: 0 - 10 V

316

Cirris Signature 1000 RX
Testsysteem Max. Test points (TP): 128 TP - 256 TP Connection Test: 5.5VDC max. At 180 µA 6.7 mA max. current (14 mW max. power).

315

Cirris Signature 1100 R+
Testsysteem Test Point Range: 128-1024 Test Voltage: 5VDC, 6mA max current

314

TSK TS 1500-1600-1700
Complete testunit on demand.

313

TSK TS 1400
Testtable for us with CT-30 cabletester.

312

TSK TS 1300
Testtable for us with CT-30 cabletester.

311

TSK CT-30
Standard cabletester for 128 – 512 testpoints, Ethernet compatible.

310

TSK CT-15 i
Standard cabletester for 128 – 384 testpoints.

309

TSK CT-12
Low cost handtester for 128 test points, with fault message on display. Short-circuit test and Continuity test.

308

TSK CT-11
Low cost handtester for 64 test points. Short-circuit test and Continuity test.

307

Schleuniger MZU 1.3
Microscope for visual analysis of cross-sectional images of crimped connections.

306

Schleuniger ESU 6
Innovative electrolyte staining process for environmentally-friendly and safe cleaning of surfaces.

305

Schleuniger SPU 60
Saw and polish unit for crimp connections and others with cross section ranges up to 60 mm².

304

Schleuniger SPU 6
Saw and polish unit for crimp connections and others with cross section ranges up to 6 mm².

303

Schleuniger PullTester 28
Motorized benchtop device for destruc-tive & non-destructive pull force tests up to 5'000 or 10'000 N (1'100 / 2'200 lb.).

302

Schleuniger PullTester 27
Schleuniger PullTester 27 : Motorized testing device for destructive pull force tests up to 5000 or 10'000 N (1'100 / 2'220 lb.).

301

Schleuniger PullTester 26
Motorized testing device for destructive and non-destructive pull force tests up to 1000 N (220 lb.).

300

Schleuniger PullTester 25
Motorized testing device for destructive pull force tests up to 1000 N (220 lb.). For various testing standards.

299

Schleuniger PullTester 20
Economical motorized testing device for destructive pull force tests up to 500 N (110 lb.) with selectable pulling speed.

298

Schleuniger CHM
Crimp height measuring device for quality assurance. Available in different versions.

297