Electronics Standard Products: Board Handling
- Automatic Dispensing 1 & 2K Materials
- Board Handling
- Carriers
- Conveyors, FiFo/ LiFo, Turn & Flip Units
- Cutting
- Line loading / Unloading
- Storage
- Chairs
- Cleaning PCB's
- Cleaning: Stencil, Screen & Frames
- Component Handling
- Dispensing heads 1 & 2K components
- Fume Extraction
- Furniture
- Inspection: X-ray and AOI
- Ionic Contamination Tester
- Manual Dispensing 1 & 2K Materials
- Marking & Traceability
- Pick & Place
- Process Aids Cleaning
- Process Optimalisation
- Repair PCB (SMD & THT)
- Selective Coating
- Soldering
- Wave
- Vapor Phase
- Solder Paste
- Process Aids Solderbath and Selective Tips
- Solder Wire
- Selective
- Reflow
- Soldering and Repair Flux
- Solderpaste Printing
- Used Equipment
- Vacuum Dispensing 1 & 2K Materials
Rommel LEG 55 WA 320/ 470 Loading Station
- Is used for automatical loading of PCB´s from 2 magazines
Rommel BM 600 TI-A Conveyor
- Transport unit with 1 belt segment
- lifting up of the PCB
- Lenght: 500mm
Rommel LPM E-530 C Loading Station
- Is used for automatical loading of PCB´s from 5 magazines
Rommel BMK 1500 T PCB Conveyor, Lift Gate
- Transport unit.
- The folding arrangement of the conveyor belt allows an interruption of the production line
- Passage width: 870mm
- Total lenght: 1500mm
Rommel LBS 03 A Bare Board Unloading Station
- For automatical output of bare PCB´s to a stack
Rommel BMS 1550 G Shuttle Conveyor
- Transport unit
- The automatic telescoping arrangement of the conveyor belt allows an interruption of the production line
- Passage width: 750mm
- Total lenght: 1550mm
Rommel LAG 55 T-400 Unloading Station
- For automatical unloading of PCB´s into 1 magazine
Rommel WS 45 T Flip Unit
- For turning printed circuit boards in the direction of transport by 180°
- or for running through
- Lenght: 600mm
- Board dimensions: 80*50 until 460*460mm
Rommel LAG 55 T-530 Unloading Station
- For automatical unloading of PCB´s into 1 magazine
Rommel DS 45-1 T Turn Unit
- The transport of the printed circuit boards takes place either linear through the system or turned by 90° to the left or right side or turned by 180°
- Lenght: 500mm
- One input direction; one output direction
Rommel LAG 55 WA 320/ 470 Unloading Station
- For automatical unloading of PCB´s into 2 magazines
Rommel DS 45-2/ 3 T Turn Unit
DS45-3
- The transport of the printed circuit boards takes place either linear through the system or turned by 90° to the left or right side
- Lenght: 500mm
- One input direction; 3 output directions
Rommel LAG 55 QS 320/ 470 Unloading Station
- For automatical unloading of PCB´s into 3 magazines
Rommel DS 45-4 T Turn Unit
- The transport of the printed circuit boards takes place either linear through the system or turned by 90° to the left or right side or turned by 180°
- Lenght: 500mm
- One input direction; 4 output directions
Rommel LPM A-530 C unloading station
- For automatical unloading of PCB´s into 5 magazines
Rommel QS 1500 T Cross Slide Unit
- For parallel inward and outward transfer of flat component groups in a production line
- Input: to go from 2 inputs (conveyor and manual) to one output
- Output: To go from one input to two outputs
Rommel LBE 55 T-400 Combinet Loader/ Unloader
- For automatical loading and unloading of PCB´s (1 magazine)
Rommel QS DS Cross Slide Unit
- For parallel inward and outward transfer of flat component groups in double line production or process equipment
Rommel LBE 55 T-530 Combined Loader/ Unloader
- For automatical loading and unloading of PCB´s (1 magazine)
Rommel LPR 40 T LiFo Buffer
- For intermediate buffering or transfer of PCB´s in a production line.
- LiFo principle
Rommel LBE 55 WA 320/ 470 Combined Loader/ Unloader
- For automatical loading and unloading of PCB´s (2 magazines)
Rommel MP 80 TK FiFo/LiFo Buffer
- Universal buffer with integrated magazine
- FiFo or LiFo principle
- Can also be used as loader/ unloader
PCB Magazines Series 600 / 700
Material rack walls in three versions:
- Polystyrol PCB temperature up to 60°C
- Polycarbonat PCB temperature up to 130°C
- Metall PCB temperature up to 200°C
Rommel VPU 23 FiFo/LiFo Buffer
- Universal in-line-bufferstation
- FiFo or LiFo principle
Variable standard systems for Wave Soldering
- 100% quality
- Maximum flexibility
Consists off:
- Frame adaptable on the solder machine
- Universal are dedicated PCB holder
- Top carrier for positioning off the components
PCB Separator MAESTRO 2 / 2M
Compact, fast and economical for PCBs with pre-scored groove
- Separation type circular blade
- Operation MAESTRO 2 by hand
- Operation MAESTRO 2M motorized
Rommel BM 500 T/ BM 600 T Conveyors
- For intermediate buffering or transfer of PCB´s in a production line
- Lenght: 500mm
Variable standard systems for SMT soldering
Variable carriers used for positioning:
- Flexible PCB’s
- Component with fixed position
- Small PCB’s onto large carrier
- Supporting thin PCB’s
PCB Separator MAESTRO 3E
For small and large PCBs for PCBs with pre-scored groove
- Separation type circular blade/linear blade
- Operation manual
- Separation length up to 450 mm
Rommel BM 1000 T Conveyors
- For intermediate buffering or transfer of PCB´s in a production line
- Lenght: 1000mm
Variable standard systems for Coating Applications
- Variable carriers used for handling PCB’s into coating processes
PCB Separator MAESTRO 4M
Fast and economical for small and large PCBs with pre-scored groove
- Separation type circular blade/linear blade
- Operation motorized
- Separation speed 300/500 mm/s
- Separtion length 370 - 600 mm
Rommel BM 1500 T Conveyors
- For intermediate buffering or transfer of PCB´s in a production line
- Lenght: 1500mm
PCB Separator MAESTRO 5M
For automatic separation of PCBs with pre-sored groove
- Separation type circular blades, max. 10 circular blades
- Seapration motorized
- Separation speed 100-220 mm/s. can be set in 10 steps
- Separation length 100 - 570 mm when light barrier activated
Rommel BM 500 T/ BM 600 T Conveyors
- For intermediate buffering or transfer of PCB´s in a production line
- Lenght: 500mm
Rommel LBS 01 C Bare Board Loading Station
- Is used for automatical loading of PCB´s from stack.
- Separation by one vacuum stamp, adjustment of the stamp isn`t necessary.
- The changeover time is extremely short.
Rommel BM 1000 T Conveyors
- For intermediate buffering or transfer of PCB´s in a production line
- Lenght: 1000mm
Rommel LBS 04 T Bare Board Loading Station
- Is used for automatical loading of PCB´s from stack
Rommel BM 1500 T Conveyors
- For intermediate buffering or transfer of PCB´s in a production line
- Lenght: 1500mm
Rommel LEG 55 T-400 Loading Station
- Is used for automatical loading of PCB´s from 1 magazine
Rommel BM 500-3 T conveyor
- Transport unit with 3 belt segments for intermediate buffering and transfer of PCB´s in a production line.
- Lenght: 1500mm
Rommel LEG 55 T-530 Loading Station
- Is used for automatical loading of PCB´s from 1 magazine
Rommel BM 500-3 THI Conveyor
- Transport unit with ergonomic designed work place with 3 belt segments for inspection, rework, intermediate buffering and transfer of PCB´s in a production line
- Lenght: 1500mm