Electronics Standard Products: Dispensing heads 1 & 2K components
Small Volume Dispenser- Dos JetPMU
- For handling of low to highly viscous dispensing media
- Area of application: Adhesion, marking, application in the μ range, as well as fine metering for practically all customer specific media.
Two-component numerical dispenser
- Adjustable dispenser volume of 0.1 mm³ to 1250 mm³ per dispenser
- Volumetric dispensing without valve
- Piston and cylinder made of ceramic
- Repeatability of the dispensed volume > 99%
- Mixing by dynamic or static mixer
- Low-volume dynamic mixing chamber
- Programmable mixing ratio
- No seals in the piston-cylinder system
Motorised dispenser
- Adjustable dispenser volume from 0.1 mm³ to 100 mm³
- Volumetric dispensing without valve
- Piston and cylinder made of ceramic
- Repeatability of the dispensed volume > 99%
- No seals in the piston-cylinder system
Continuous flow dispenser
- Volumetric continuous flow dispensing thanks to a rotating displacement system
- Simple setting of the dispensing parameters via numerical controller
- Adjustable dispenser volume from 0.4 mm³
- Repeatability of the dispensed volume > 99%
Cartridge dispenser
- Simple setting of the dispensing parameters via numercial axis
- Standard cartridge type: 3/5/10/30 cm³
- Simple handling and changeover
- Repeatability of the dispensed volume > 95%
Bottom stamp dispenser
- Simple mechanical setting and handling of the dispenser
- Repeatability of the dispensed volume > 99%
Piston Dispenser - Dos P
- For handling of: non-abrasive to highly abrasive, non-filled to highly filled, liquid to highly viscous single and two-component materials.
- Area of application: Exact metering with repeated accuracy in the electrical and electronic manufacturing sector.
Piston Dispenser - Dos P multiple outlet
- For handling of: non-abrasive to highly abrasive, non-filled to highly filled, liquid to highly viscous single and two-component materials.
- Area of application: Highly precise metering system for dispensing, filling, applying, sealing, adhering, fixing and covering in the electrical and electronic manufacturing sector.
Gear Pump Dispenser - Dos G
- For handling of:non-abrasive, highly viscous, single-component materials up to 1,000,000 mPa and higher.
- Area of application: For applying single-component beads on electronic housings and PCBs for sealing, gluing and dam & fill applications.
Small Volume Dispenser- Dos PM
- For handling of filled and unfilled, liquid to highly viscous single and two-component materials.
- Area of application:For example, dam and fill applications or the encapsulation of chips on lead frames
One-component numerical dispenser
- Adjustable dispensing volume from 0.1 mm³ to 1250 mm³
- Volumetric dispensing without valve
- Piston and cylinder made of ceramic
- Repeatability of the dispensed volume > 99%
- No seals in the piston-cylinder system
