Application range
The programmable Double StripCrimp DC 200 is designed for high precision stripping and crimping of side-feed terminals for wires between 0.05 – 1.5 mm² (30 – 15 AWG).
Features
• All stripping parameters and special functions can be adjusted through the operating panel
• Way back and re cut can be activated via the software
• Crimp only or strip only modes can be selected for special jobs or set-up
• Counter functions (total, unit and batch counters), settings (speed, activate CFM, pneumatic valve) and the language selection are programmable via the operating panel and are shown on the display
• Job memory for all cable parameters and functions
• Active slug removal mechanism
• Quick-change pneumatic feed Special Exmore Double applicator
• Electrical creeping speed (left/right) with home position display and automatic home position function
• Fine adjustment of crimping height (micro-adjustment)
• Short outer jacket stripping 14mm(Depends on Terminal Pitch)
• 2 Channel Crimp force Monitoring Device
• Paper winder
• Work light
Possible Options
• Worklight
• Double channel crimpforce monitoring
• Paper winder
• NIO-box with automatic reset function
• Workbench
Technical Specifications
Force 33 kN (3.7 Ton)
Power 0.75 KW
Cross Section Range 0.05 – 1.5 mm2 ( 30 – 15AWG) Double stripping unit
Stroke 40 mm (1.575”)
Shut Height 135.788 mm (5.3460”)
Height Adjustment ± 0.25 mm (0.01”), in increments of 0.025 mm (0.001”)
Cycle Time < 0.9 s for stripping and crimping (crimping cycle time adjustable from 350 ms to 1 s)
Stripping Length 0.5 – 15 mm (0.02” – 0.59”)
Way back adjustable in the software, 0-2mm
Re cut 0 – 4 mm (0 - 0.157”)
Insulation Diameter up to 6.3 mm ( 0.25”)
Cable Clamp clamping force adjusted with pneumatic pressure reducing valve
Memory Capacity 20
Press Activation Sensor actuator (foot pedal optional)
Noise Level < 70 dB (A)
Power 115 VAC - 230 VAC, 50/60 Hz
Capacity 255 VA
Dimensions (LxWxH) 340 mm x 330 mm x 710 mm (13.4” x 13.0” x 28.0”)
Weight 90 kg (198 lbs)
CE – Conformity The Double StripCrimp DC 200 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Important Note Exmore recommends that wire samples be submitted in case where there is doubt as to the processing capabilities of a particular machine.
