IRRS

IR ROTARY SHRINK DEVICE

The Exmore Infrared Rotary Shrink Device is an Infrared (IR) processing device to process multiple products in a continuous controlled process, with heating and cooling.

On the carrousel are 4 positions to insert a product. Each product can have multiple shrinking sleeves along the length of the cable to be shrunk by the multiple emitter zones (e.g.: there are 3 zones of 60mm shown in the picture). Each emitter zone has its own cooling ventilator.

The cables or wires are mounted in the custom-made product fixtures on the carousel, allowing an optimized alignment or positioning of theshrink sleeve.

By turning the carousel by 90 degrees, the shrinking process of one (or more) Infrared zones, will be activated.

The operator can load the next product on the 2nd position on the carousel. After finishing the 1st shrink, the operator can turn the carousel to the next position, where the 2nd position on the carousel will be shrunk. The same will be done for the 3th and 4th position.

The ventilator(s) will cool down the sleeves after the heating process, when the carousel is turned to the next position. In the next phase the operator will unload the first loaded product and reload the next product. This is how you get continuous production process.

Infrared output (temperature) and shrinkage time can be set at the controller, avoiding overheating and ensuring reproducibility. The Infrared processing appliance allows efficient and reliable processing of the following components:

■ Heat shrink tubing
■ Adhesive coated heat shrinking tubes
■ Label sleeves
■ Solder sleeves
■ Heat shrinkage caps
■ Related heat-shrink materials and products

An additional Infrared Digital Control Unit IRDC-2000 is required for the operating of the processing appliance.

Specifications

IRRS-230-2060: Infrared Rotary shrink– 1 IR zone device -1x L=60mm zone – 230V
IRRS -230-4060: Infrared Rotary shrink– 2 IR zone device -2x L=60mm zone – 230V
IRRS -230-2120: Infrared Rotary shrink– 1- IR zone device -1x L=120mm zone – 230V
IRRS -230-4120: Infrared Rotary shrink– 2- IR zone device -2x L=120mm zone – 230V

Custom holders are not included, see options.

Options

Custom made fixtures on demand. Each position (4x) on the carousel, needs the fixtures.

Technical data

Protection typeIP40
Protection classI
Identification approvalCE
Thermal safetyClass 0
Ambient temperature range0-40 C°
Ambient humidity range15 – 85% r.h.
Cable length1.5m
Estimated life of the IR radiant element5000 h
TypeDim. (LxWxH)mmWeightShrinking zone (L/R)EmittersPower (W)
IRSS-230-20601000 x 360 x 33030 kg1 x 60 mm2 x 60 mm600
IRSS-230-40601000 x 360 x 33036 kg2 x 60 mm4 x 60 mm1.200
IRSS-230-21201000 x 360 x 33031 kg1 x 120 mm2 x 120 mm700
IRSS-230-41201000 x 360 x 33037 kg2 x 120 mm4 x 120 mm1.400