IR SINGLE SHRINK DEVICE
The Exmore Infrared Single Shrink Device is an Infrared (IR) processing device to process multiple shrinking sleeves in one action, depending on the dimensions of heat shrink tubing and cable. Multiple cables or wires can be held in different holders, which gives the Single Shrink Device a wide range of applications.
Infrared output (temperature) and shrinkage time can be set via the controller, avoiding overheating and ensuring reproducibility.
By sliding the movable unit between the emitters, the shrinking process is started.
All inlaid products are shrunk in one stroke. After shrinking, the operator must manually unload and reload the products.
The Infrared processing appliance allows efficient and reliable
processing of the following components:
■ Heat shrink tubing
■ Adhesive coated heat shrinking tubes
■ Label sleeves
■ Solder sleeves
■ Heat shrinkage caps
■ Related heat-shrink materials and products
An additional Infrared Digital Control Unit IRDC-2000 is required for the operating of the processing appliance.
Infrared Single shrink– 2-emitter device -2x L=170mm zone – 230V
Standard M-holders are included.
Custom holders on demand.
|Thermal safety||Class 0|
|Ambient temperature range||0-40 C°|
|Ambient humidity range||15 – 85% r.h.|
|Estimated life of the IR radiant element||5000 h|
|Type||Shrinking Zone (L/R)||Emitters||Power [W]|
|IRSS-230-4170||170 mm||2 x 170 mm||1.200|